1C.370 UltraMax Precatalyzed N/C Vinyl Sealer (1C.370)

Lenmar’s UltraMax^TM 1C.370 high performance, precatalyzed vinyl modified sealer is a water white sanding sealer.  This sealer will serve as a barrier against moisture and will also provide a higher level of protection against the possible existence of imbedded surface contaminants by helping to control the appearance of unwanted fisheyes.  Additional benefits include excellent penetration and adhesion into properly prepared interior wood surfaces, fast drying, water white clarity and a ready-to-spray viscosity that is HAPS compliant. 

Use UltraMax^TM 1C.370 with confidence under any of Lenmar’s Acrylic Coatings, Precatalyzed Lacquers or Conversion Varnishes.  No reduction of 1C.370 is required.

BENEFITS:      

·  EXCEEDS KCMA STANDARDS

·  BARRIER AGAINST MOISTURE

·  WATER WHITE CLARITY

·  RESISTS COLD CHECKING

·  READY TO SPRAY VISCOSITY

·  HELPS CONTROL FISHEYES

·  HAPS COMPLIANT

RECOMMENDED USES:

·  KITCHEN CABINETS

·  BATHROOM VANITIES

·  FURNITURE

·  DISPLAYS

·  WINDOW AND DOOR TRIM

·  ANTIQUE RESTORATION

CHARACTERISTICS:

Weight Per Gallon: 7.5 – 7.6 lbs.        

% Weight Solids: 21 – 22

% Volume Solids: 15 - 16

Viscosity # 2 Zahn EZ: 25 – 28 seconds            

VOC:  Does not exceed 678 g/l

           or 5.64 lb./gal. 

HAPS: < 0.8 lb. of HAPS Per lb. of Solids

COLOR: Water White, Clear

DRY TIMES @ 3 – 4 mils wet

                 Scuff Sand:  25 – 30 min

                Recoat 30-40 minutes