Please select a Product below: |
|
COROPOXY 100% Solids Epoxy Coating
1433 Line High performance, two component, 100% Solids Self Leveling Epoxy Coating- Gloss for heavy film build applications on interior concrete floors.
Details>>
|
|
COROPOXY Surface Tolerant Mastic
113 Line Industrial Surface Tolerant Mastic Semi-Gloss provides excellent corrosion protection, excellent flexibility and very high build in one application over marginally prepared corroded steel, over most existing coatings and over blasted metal.
Details>>
|
|
COROPOXY Polyamide Epoxy
1101 Line Industrial Polyamide Epoxy Gloss, Semi-Gloss and High Build Gloss - highly cross linked film resists many chemicals ans solvents and does not support growth of mold, fungi or other micro-organisms.
Details>>
|
|
COROPOXY Polyamide Epoxy Clear Gloss
101-10 Polyamide Epoxy Clear Gloss - a clear sealer or finish is a highly cross linked film that resists many chemicals and solvents and does not support the growth of mold, fungi or other microorganisms.
Details>>
|
|
|
COROPOXY Polyamide Epoxy Gloss (Immersion Capable)
101-1 Polyamide Epoxy Gloss - maximum impact and abrasion resistance, does not support growth of mold, fungi or other micro-organisms. May be used in immersion applications.
Details>>
|
|
COROPOXY Fast Cure Satin Sheen
145-111 Industrial Fast Cure Satin Sheen Epoxy - cures in 24 hours @ 77 Degrees F. Will cure in temperatures as low as 33 degrees F. High solids, VOC compliant, excellent chemical and abrasion resistance.
Details>>
|
|
COROPOXY 100% Solids Epoxy Pre-Primer Clear
1447-10 Industrial 100% Solids Epoxy Pre-Primer Clear Gloss - two component epoxy sealer designed for rusted steel where extensive surface preparation is not possible. Can be used as barrier coat over alkyd coatings.
Details>>
|
|
COROPOXY WB Amine Adduct Epoxy - Gloss
142 Line Waterborne 2 component amine adduct epoxy. Superior chemical resistance , impact and abrasion resistance compared to conventional waterborne epoxies. High gloss finish.
Details>>
|
|
COROPOXY Waterborne Acrylic Epoxy
138 Line Industrial Waterborne Acrylic Epoxy - Gloss or Semi-Gloss - long term durability and gloss retention in a low VOC, water clean-up product.
Details>>
|
|
COROPOXY Hi-Build Multi-Purpose Polyamide Epoxy
111-111 Industrial Hi-Build Multi-Purpose Polyamide Epoxy Low Sheen can be used as a high build primer, an intermediate or as a low sheen finish coat. Anti-corrosive, suitable for immersion in fresh or salt water.
Details>>
|
|
COROPOXY Polyamide Electrostatic
141 Line Industrial Polyamide Electrostatic Gloss and Semi-Gloss - two component gives maximum durability, abrasion resistance and chemical and moisture resistance. Great for lockers, partitiions, office furniture, office cabinets, railings, etc.
Details>>
|
|
COROPOXY Polyamide Coal Tar Epoxy
61-2 Industrial Polyamide Coal Tar Epoxy - high solids, two component - provides excellent film build - an excellent barrier coat for immersion service in fresh, salt or waste water. Product is resistant to many acids, alkalis and mild solvents in splash and spill exposures.
Details>>
|
|
CORO-BOND Polyamide Epoxy Primer
1201 Line Industrial Polyamide Epoxy Primer - two component primer is excellent for use on ferrous and non-ferrous metals. It is formulated with corrosion inhibiting pigments for long term rust prevention.
Details>>
|
